Car Voltan Auto-Charge
Do you know how important is the voltage on the movement and life span of a car? Most car problem that arises is related to the power supply voltage is unstable, so it turned into a serious problem. Typically, car owners look for assistance when a car mechanic problems.
However, they failed to find reasons and solutions for addressing the problem. What a sad, car owners were forced to compromise on the issue.
As we know, "prevention is better than cure", so, our body shop for your health, as well as our beloved cars. Small spending in advance is definitely a car care investment that would yield more mileage for your future.
The circuit and the use of petrol as well correlated each other. If the circuit is obsolete, it not only causes high petrol car, throttle problem, the primary engine of life, but also gear the car does not pass. All of these problems may occur because of a defect in the car circuit.
So, to achieve the level of use of the optimum voltage to the car, you need a complete circuit and stable. Now, the emergence of AUTO-CHARGE, the newest Japanese electronic products and dihakpatenkan was able to improve the stability of the electrical circuit through the car voltage stabilizer.
Once the use AUTO-CHARGE, your car will be controlled so as to solve small problems caused by unstable voltage.
Another advantage, how to install AUTO-CHARGE is very simple. It will operate when you connect it to the cigar, without installing any parts in the fuel tank may damage your car.
More Article:
3 Secret Tips Before You Buy A Used Car
4 tips to save a bundle on your next new car purchase
Looking For More Tips about Car?
Custom Search
Showing posts with label Engine. Show all posts
Showing posts with label Engine. Show all posts
Monday, May 23, 2011
Sunday, May 22, 2011
Heat Engines Before Starting the Journey
Heat Engines Before Starting the Journey
TO keep the vehicle can be used in long maturities, the driver should not always do the acceleration, braking and turning suddenly, except in cases of urgency.
PRACTICE switch engine and continue the road is not good. Ideally, after the engine started, let two or three minutes before starting the journey. This is important to ensure that the engine in the heat.
When the heating process, the lubricant will flow into all parts of the engine. If the engine continues to bear before heating, this means that the engine has to work when the oil has not reached every part of the necessary dilinciri.
Thus, each division will have a rub against wear due to heavy geselan faster so the engine will be damaged.
Calculated engine is hot enough when the needle slightly cooler water temperatures. Heating process is also applicable to transmission systems and other moving parts. When it starts to drive, do not continue to accelerate. Move slowly for some time before accelerating.
In addition, the engine also can not bear rough. Do not let the engine work in a low gear for too long, for example, three gear when climbing hills.
The practice of 'pull' of the old low-gear acceleration is also the way to power the car is not healthy for your health. If left too long in that situation, other than the engine power reduced, the engine will be too hot. The engine is always in extremely hot conditions will quickly be damaged.
The engine will also work beyond the maximum rotation of the axle in idle or at the time of the transfer gear to a lower position (eg, from gear to gear two of three) performed at the time the vehicle was moving at high speeds or when the vehicle is sliding on the road steep). So, but beware.
To keep the vehicle can be used in the long term also, the driver should not always do the acceleration, braking and turning abruptly, except in cases of urgency.
In addition, avoid too frequent use of brakes on a steep road or at high speed to avoid the restrictions of steam. Also avoid stepping on the clutch pedal is not needed and do not move the gear is rough, whether manual or automatic gear.
More Tips:
2006 Mazda MX 5 Miata the Freewheeling Youth of the Sports Car World Matures
3 Fast Tips on How To Sell Your Car for the Most
TO keep the vehicle can be used in long maturities, the driver should not always do the acceleration, braking and turning suddenly, except in cases of urgency.
PRACTICE switch engine and continue the road is not good. Ideally, after the engine started, let two or three minutes before starting the journey. This is important to ensure that the engine in the heat.
When the heating process, the lubricant will flow into all parts of the engine. If the engine continues to bear before heating, this means that the engine has to work when the oil has not reached every part of the necessary dilinciri.
Thus, each division will have a rub against wear due to heavy geselan faster so the engine will be damaged.
Calculated engine is hot enough when the needle slightly cooler water temperatures. Heating process is also applicable to transmission systems and other moving parts. When it starts to drive, do not continue to accelerate. Move slowly for some time before accelerating.
In addition, the engine also can not bear rough. Do not let the engine work in a low gear for too long, for example, three gear when climbing hills.
The practice of 'pull' of the old low-gear acceleration is also the way to power the car is not healthy for your health. If left too long in that situation, other than the engine power reduced, the engine will be too hot. The engine is always in extremely hot conditions will quickly be damaged.
The engine will also work beyond the maximum rotation of the axle in idle or at the time of the transfer gear to a lower position (eg, from gear to gear two of three) performed at the time the vehicle was moving at high speeds or when the vehicle is sliding on the road steep). So, but beware.
To keep the vehicle can be used in the long term also, the driver should not always do the acceleration, braking and turning abruptly, except in cases of urgency.
In addition, avoid too frequent use of brakes on a steep road or at high speed to avoid the restrictions of steam. Also avoid stepping on the clutch pedal is not needed and do not move the gear is rough, whether manual or automatic gear.
More Tips:
2006 Mazda MX 5 Miata the Freewheeling Youth of the Sports Car World Matures
3 Fast Tips on How To Sell Your Car for the Most
Saturday, May 21, 2011
General Tips Buying Used Cars
General Tips Buying Used Cars
Body beautiful cars and shiny paint is not necessarily a used car that you want to buy it in good condition, especially the engine. The first step to open the front cover to see the engine. Car engine should be clean, but not necessarily until shiny.
Then sit in the seat of the car and tried to feel keselesaannya. The car you choose should be suitable and comfortable for you. Steringnya must only be mobilized within a distance of two inches in normal circumstances and there is no sound when turning.
Check coordinator seats, door locks, window mirror risers, horns, lamps, lights, radios and all the equipment there. Some may not be important, but it is possible to show you how the car is maintained.·AFTER the switch on the engine. It should be live very quickly and then gradually slow. Leave on for one or two seconds before you hit the gas pedal. See smoke coming out the back. Blue smoke means the engine is fully dioverhaul. Where black smoke means karburatornya inappropriate.
White smoke does not indicate any defect in the engine when cold, but if the engine was hot it means the head gasket is leaking. This requires a large expenditure. So do not buy the car. The engine vibrates too strong showing was not very good car to buy. After the engine is heated, turn off the flash and try to swipe your finger into the exhaust (make sure the exhaust is not hot). Keladaknya should be whitish gray. If it is black or oily, just ignore the car.
Turn on the engine and check the oil in the automatic transmision. It must be clean without any smell of burning.·Salespeople may try to convince you that a pilot test in such a short distance in the vicinity of a building is sufficient. This is not true. State to whom you want to make a road test on the car. If the salesperson was not very interested. Find it in another car.
The road you plan to pass must include a dry road, the road is deserted, hilly roads, uneven roads and parking spaces are empty. All the meter must be functioning properly, especially oil gauge and engine temperature. If not do not buy the car.
Drive to a deserted road and increase speed to 56 kmh, tranmision automatically be changed without any noise or jerky. If the car has a system change hands, it should not be sticky-tack or a groan.
Slow down to 10 kmh car with the brake wear slowly. Make sure there is no sound. The car must also be slow in a straight line, without terpusing to the right or left.·INCREASE speeds up to 25 to 30 kmh and then press the brakes all of a sudden (make sure no other cars behind you). The car must be stopped quickly without terpusing. In the parking space is empty and flat, press brakes until the car is completely stopped.
Switch to the reverse gear and reverse at a speed of 6 kmh. Then press the brake to stop, switch to the next gear and so on. Do this four or five times to test the transmision. All changes must pass with no sound.
Drive in the pattern number 8 to test the steering response. If the steering a bit hard, it may be due to linkage or front suspension system. Do not buy the car unless you are assured that the problem will be repaired.
Still in the empty parking space. Increase speed to about 30kmj and remove the hand from the steering for some time. The car must move straight and crashed. Then press the brakes gently without touching the steering. The car must stop in a straight line. If it terpusing, this car is obviously a problem. Make sure you have the assurance that the problem will be repaired.·Subsequent to drive it on the road does not mean that you choose. Do not buy a car that is too strong to shake or bounce-hulls. The car may have spring shock absorbers or suspension parts are damaged.
When climbing a hill. Increase speed to about 60 kmh. Cars must not be stuck-stuck. If this happens, it means the car has a faulty transmission. Down to the middle of the hill, switch to the free gear and put the parking brake. Cars must remain when you remove your foot from the brake pedal.
After that the road back to normal, stop your car look backwards before continuing back and increase speed to about 80kmj. Increase the speed to be smoother and make sure no smoke out the back and there is no engine noise is not so good shows. If the acceleration (increase speed) took more than 15 seconds, this means that the engine is not very well and may require costly repairs to the expenditure.·BACK back to the parking space. Upon entering the parking space, let the engine for several minutes. Then look to the car whether or not there are oil droplets. Lift the engine cover and check the engine again to see any leaks. Ask the salesperson drive a car across the chambers and then turned back toward you. Please note any peculiarity that appears in the car, whether sound or control.
It is advisable that you bring the car to a mechanic. Bring the car to a service station. Mechanics is possible to examine some of your own damage is not visible, and whether the effects of the damage that you really serious or not.
They also can create stress tests to check the engine rings or valves. Before you make a selection first check the car title or other documents. Number of engines and other must be correct. Do not let your un stolen car.
Read Also:
20 Tips to cheaper car insurance
2006 Chevrolet Corvette GM s Fastest and Most Powerful Car with Superior Aftermarket Parts at Partstrain
Body beautiful cars and shiny paint is not necessarily a used car that you want to buy it in good condition, especially the engine. The first step to open the front cover to see the engine. Car engine should be clean, but not necessarily until shiny.
Then sit in the seat of the car and tried to feel keselesaannya. The car you choose should be suitable and comfortable for you. Steringnya must only be mobilized within a distance of two inches in normal circumstances and there is no sound when turning.
Check coordinator seats, door locks, window mirror risers, horns, lamps, lights, radios and all the equipment there. Some may not be important, but it is possible to show you how the car is maintained.·AFTER the switch on the engine. It should be live very quickly and then gradually slow. Leave on for one or two seconds before you hit the gas pedal. See smoke coming out the back. Blue smoke means the engine is fully dioverhaul. Where black smoke means karburatornya inappropriate.
White smoke does not indicate any defect in the engine when cold, but if the engine was hot it means the head gasket is leaking. This requires a large expenditure. So do not buy the car. The engine vibrates too strong showing was not very good car to buy. After the engine is heated, turn off the flash and try to swipe your finger into the exhaust (make sure the exhaust is not hot). Keladaknya should be whitish gray. If it is black or oily, just ignore the car.
Turn on the engine and check the oil in the automatic transmision. It must be clean without any smell of burning.·Salespeople may try to convince you that a pilot test in such a short distance in the vicinity of a building is sufficient. This is not true. State to whom you want to make a road test on the car. If the salesperson was not very interested. Find it in another car.
The road you plan to pass must include a dry road, the road is deserted, hilly roads, uneven roads and parking spaces are empty. All the meter must be functioning properly, especially oil gauge and engine temperature. If not do not buy the car.
Drive to a deserted road and increase speed to 56 kmh, tranmision automatically be changed without any noise or jerky. If the car has a system change hands, it should not be sticky-tack or a groan.
Slow down to 10 kmh car with the brake wear slowly. Make sure there is no sound. The car must also be slow in a straight line, without terpusing to the right or left.·INCREASE speeds up to 25 to 30 kmh and then press the brakes all of a sudden (make sure no other cars behind you). The car must be stopped quickly without terpusing. In the parking space is empty and flat, press brakes until the car is completely stopped.
Switch to the reverse gear and reverse at a speed of 6 kmh. Then press the brake to stop, switch to the next gear and so on. Do this four or five times to test the transmision. All changes must pass with no sound.
Drive in the pattern number 8 to test the steering response. If the steering a bit hard, it may be due to linkage or front suspension system. Do not buy the car unless you are assured that the problem will be repaired.
Still in the empty parking space. Increase speed to about 30kmj and remove the hand from the steering for some time. The car must move straight and crashed. Then press the brakes gently without touching the steering. The car must stop in a straight line. If it terpusing, this car is obviously a problem. Make sure you have the assurance that the problem will be repaired.·Subsequent to drive it on the road does not mean that you choose. Do not buy a car that is too strong to shake or bounce-hulls. The car may have spring shock absorbers or suspension parts are damaged.
When climbing a hill. Increase speed to about 60 kmh. Cars must not be stuck-stuck. If this happens, it means the car has a faulty transmission. Down to the middle of the hill, switch to the free gear and put the parking brake. Cars must remain when you remove your foot from the brake pedal.
After that the road back to normal, stop your car look backwards before continuing back and increase speed to about 80kmj. Increase the speed to be smoother and make sure no smoke out the back and there is no engine noise is not so good shows. If the acceleration (increase speed) took more than 15 seconds, this means that the engine is not very well and may require costly repairs to the expenditure.·BACK back to the parking space. Upon entering the parking space, let the engine for several minutes. Then look to the car whether or not there are oil droplets. Lift the engine cover and check the engine again to see any leaks. Ask the salesperson drive a car across the chambers and then turned back toward you. Please note any peculiarity that appears in the car, whether sound or control.
It is advisable that you bring the car to a mechanic. Bring the car to a service station. Mechanics is possible to examine some of your own damage is not visible, and whether the effects of the damage that you really serious or not.
They also can create stress tests to check the engine rings or valves. Before you make a selection first check the car title or other documents. Number of engines and other must be correct. Do not let your un stolen car.
Read Also:
20 Tips to cheaper car insurance
2006 Chevrolet Corvette GM s Fastest and Most Powerful Car with Superior Aftermarket Parts at Partstrain
Less water in the radiator causes the heat engine
IF you see smoke or burn cars in the street, there must be something wrong on the car engine. One reason is the lack of water in the radiator causing the engine is hot.
In addition, the heat engine is also due to clogged radiator pipes, dirt in the radiator fins and damage to the fan and cooling system thermostat.
In fact, the ignition system is less accurate, damage to the fuel line system, the exhaust is clogged, the problem of clutch, brake friction and vehicle handling is also not good cause the engine to heat up.
The engine is too hot can be dangerous if later invited to act as it can cause your vehicle smoke, fire and then exploded.
If your engine overheats, stop by the roadside with shade. You do not have to panic, but stop the car and tried to do self-examination first.
The first step, open the bonnet to cool the vehicle while the engine and check one of the sources mentioned earlier. After that, check the radiator to ensure that vehicles do not leak in that part.
After that check the fan belt. If there is a leak in the radiator or a broken fan belt, switch off the engine. If there are no leaks in the radiator and fan belt is still good, turn on the engine and run it for a moment in the rotation is higher than normal.
Step is to allow air to flow through the radiator fins with a large number. The water in the radiator will be cold and the water pump will work more quickly so that the cooling water to flow better.
Not long after that the engine temperature decreases. Then lower the engine rotation earlier and open the radiator cap. The cover should be opened carefully to avoid dangerous spray of hot water and steam out of the radiator.
Fill water into the radiator while the engine is still slowly under normal conditions and turn off the engine when already cold. If too little water in the radiator, it will cause the engine to heat up and steam coming out of the radiator.
In this case, switch off the engine immediately and check the radiator.
First, open the radiator cap first and behind ketukannya using a screwdriver and turn it gently with a cloth.
Hold the container close to the radiator so steam can flow out and into the low pressure in the radiator. It is then the cap is released.
If, there is a leak in the radiator, especially in the connection pipe or channel, turn the engine at a higher rotation than usual and check the connection points.
The situation is critical because some leaks are not visible at low engine rotation. If there is a leak, tighten the screw fasteners and loop fasteners, if damaged, use the wire in place.
If there are leaks, wrap the damaged section with tape, and strengthened with wire. You have to remember that improvement is only for a while before being brought to a workshop nearby.
Radiator pipes are clogged due to the scale or the rust will affect the water cycle or cause it to stop even though there are a lot of water.
The situation may be found by examining the flow of waste water at the tap. If the water does not flow out smoothly or not at all, it shows the radiator pipes are blocked.
To fix it, open the tap on the engine block so that cooling water can be removed. Open the radiator cap and flush with water for about 10 minutes to remove the scale or rust.
Impurities in the radiator fins because of dry leaves, insects or mud embedded in the face of the radiator will cause the cooling air flow will be interrupted until the water becomes hot.
Impurities on the surface can be cleaned using high pressure air or water menyemburnya. The confusion in the vehicle control measures contributed to the engine heats up.
Although the engine is in good condition but when the vehicle was climbing a hill or overloading, it can get hot.
The engine can be cooled back to you shortly how to stop the vehicle, opened the bonnet, turn the engine at high speed or fill the radiator with cold water.
Read Also:
15 Ways to Lower Your Car Insurance Quote
18 Simple Ways To Save Money On Your Car
In addition, the heat engine is also due to clogged radiator pipes, dirt in the radiator fins and damage to the fan and cooling system thermostat.
In fact, the ignition system is less accurate, damage to the fuel line system, the exhaust is clogged, the problem of clutch, brake friction and vehicle handling is also not good cause the engine to heat up.
The engine is too hot can be dangerous if later invited to act as it can cause your vehicle smoke, fire and then exploded.
If your engine overheats, stop by the roadside with shade. You do not have to panic, but stop the car and tried to do self-examination first.
The first step, open the bonnet to cool the vehicle while the engine and check one of the sources mentioned earlier. After that, check the radiator to ensure that vehicles do not leak in that part.
After that check the fan belt. If there is a leak in the radiator or a broken fan belt, switch off the engine. If there are no leaks in the radiator and fan belt is still good, turn on the engine and run it for a moment in the rotation is higher than normal.
Step is to allow air to flow through the radiator fins with a large number. The water in the radiator will be cold and the water pump will work more quickly so that the cooling water to flow better.
Not long after that the engine temperature decreases. Then lower the engine rotation earlier and open the radiator cap. The cover should be opened carefully to avoid dangerous spray of hot water and steam out of the radiator.
Fill water into the radiator while the engine is still slowly under normal conditions and turn off the engine when already cold. If too little water in the radiator, it will cause the engine to heat up and steam coming out of the radiator.
In this case, switch off the engine immediately and check the radiator.
First, open the radiator cap first and behind ketukannya using a screwdriver and turn it gently with a cloth.
Hold the container close to the radiator so steam can flow out and into the low pressure in the radiator. It is then the cap is released.
If, there is a leak in the radiator, especially in the connection pipe or channel, turn the engine at a higher rotation than usual and check the connection points.
The situation is critical because some leaks are not visible at low engine rotation. If there is a leak, tighten the screw fasteners and loop fasteners, if damaged, use the wire in place.
If there are leaks, wrap the damaged section with tape, and strengthened with wire. You have to remember that improvement is only for a while before being brought to a workshop nearby.
Radiator pipes are clogged due to the scale or the rust will affect the water cycle or cause it to stop even though there are a lot of water.
The situation may be found by examining the flow of waste water at the tap. If the water does not flow out smoothly or not at all, it shows the radiator pipes are blocked.
To fix it, open the tap on the engine block so that cooling water can be removed. Open the radiator cap and flush with water for about 10 minutes to remove the scale or rust.
Impurities in the radiator fins because of dry leaves, insects or mud embedded in the face of the radiator will cause the cooling air flow will be interrupted until the water becomes hot.
Impurities on the surface can be cleaned using high pressure air or water menyemburnya. The confusion in the vehicle control measures contributed to the engine heats up.
Although the engine is in good condition but when the vehicle was climbing a hill or overloading, it can get hot.
The engine can be cooled back to you shortly how to stop the vehicle, opened the bonnet, turn the engine at high speed or fill the radiator with cold water.
Read Also:
15 Ways to Lower Your Car Insurance Quote
18 Simple Ways To Save Money On Your Car
Subscribe to:
Posts (Atom)
